Casas Adobes Epoxy Pros logoCasas Adobes Epoxy ProsEpoxy Flooring · Casas Adobes, AZ
Concrete Floor Leveling photo

Casas Adobes Epoxy Pros

Concrete Floor Leveling in Casas Adobes, AZ

Concrete floor leveling fixes low spots and uneven slabs before coating. Free estimates for garages and interior floors in Casas Adobes.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Casas Adobes and nearby communities.

Why does your floor feel like it's tilting toward one corner? Older slabs settle unevenly over the decades, and in Pima County's established neighborhoods that's a common finding once we start prep work on a coating job.

Casas Adobes Epoxy Pros checks elevation across the slab before any coating goes down. If low spots or dips turn up, leveling compound gets poured first so the finished floor sits flat.

What's included

What's included with Concrete Floor Leveling

Typically included: Optional: Customer prep:

  • Floor elevation survey
  • Surface cleaning and debris removal
  • Crack pre-treatment where needed
  • Self-leveling compound pour
  • Smoothing and flatness inspection
  • Fiber-reinforced leveling mix for high-movement areas
  • Moisture mitigation primer under the leveler
  • Combined scheduling with a coating install
  • Clear the floor area completely before the survey
  • Point out any spots where water tends to pool

Concrete Floor Leveling

Process

  • Floor Elevation Survey — A survey identifies low spots and height variations across the slab.
  • Surface Cleaning — Dust and debris are removed to allow leveling compound to bond properly.
  • Crack Pre-Treatment — Existing cracks are addressed before leveling material is poured.
  • Self-Leveling Pour — A self-leveling compound is poured and spread across uneven areas.
  • Smoothing & Finishing — The leveling compound is smoothed to achieve a flat, uniform surface.
  • Cure Time & Inspection — The leveled floor is left to cure and then inspected for flatness.

Materials

Materials we use

  • Self-Leveling Underlayment photo

    Self-Leveling Underlayment

    A flowable compound fills low spots and creates a flat substrate, common on older Pima County slabs.

  • Fast-Setting Leveler photo

    Fast-Setting Leveler

    A quick-setting formula reduces downtime between leveling and coating.

  • Bonding Primer photo

    Bonding Primer

    A primer improves adhesion between old concrete and new leveling material.

  • Fiber-Reinforced Compound photo

    Fiber-Reinforced Compound

    Fiber additives increase strength and reduce cracking in the leveling layer.

  • Polymer-Modified Mix photo

    Polymer-Modified Mix

    A polymer blend improves flexibility and durability of the leveled surface.

  • Moisture Mitigation Primer photo

    Moisture Mitigation Primer

    A primer reduces moisture transmission from the slab, useful on older homes with no vapor barrier beneath.

Before & after

Before and after Concrete Floor Leveling

  • Concrete Floor Leveling photo
    Before
  • Concrete Floor Leveling photo
    After

When to call

When to call for Concrete Floor Leveling

Call Casas Adobes Epoxy Pros at (928) 384-3434 for a free estimate and elevation check.

  • You notice visible dips or low spots across the slab
  • Water pools in one corner of the garage after rain
  • A ball or marble visibly rolls toward one side of the room
  • Wear patterns on an old coating show uneven traffic stress
  • You're planning a coating job and want the slab checked first

FAQs

Concrete Floor Leveling FAQs

Can epoxy be applied over cracked or pitted concrete without leveling first?

Small cracks and pits can be patched directly, but larger dips need leveling compound first or the coating will just follow the uneven surface.

How do you fix moisture issues in a slab before leveling?

A moisture test comes first. If readings are high, a mitigation primer goes down before the leveling compound to block vapor transmission.

How long does concrete floor leveling take before coating can start?

The leveling pour itself takes a day, with cure time of roughly 24 to 48 hours before coating work begins on top.

Is floor leveling always needed before a new coating?

Not always. It depends on how uneven the existing slab is. Minor variations don't need it; visible dips or pooling usually do.

Next step

Get a Concrete Floor Leveling estimate in Casas Adobes

How it works

Our process

  1. Floor Elevation Survey photo
    Step 1

    Floor Elevation Survey

    A survey identifies low spots and height variations across the slab.

  2. Surface Cleaning photo
    Step 2

    Surface Cleaning

    Dust and debris are removed to allow leveling compound to bond properly.

  3. Crack Pre-Treatment photo
    Step 3

    Crack Pre-Treatment

    Existing cracks are addressed before leveling material is poured.

  4. Self-Leveling Pour photo
    Step 4

    Self-Leveling Pour

    A self-leveling compound is poured and spread across uneven areas.

  5. Smoothing & Finishing photo
    Step 5

    Smoothing & Finishing

    The leveling compound is smoothed to achieve a flat, uniform surface.

  6. Cure Time & Inspection photo
    Step 6

    Cure Time & Inspection

    The leveled floor is left to cure and then inspected for flatness.

Ask about Concrete Floor Leveling

Tell us about the project and how to reach you.

Call (928) 384-3434